 |
 |
 |
|
The PuriTec UCT-12 triple stage water filter allows you to customize your protection! Comes complete with stainless steel faucet spigot. Rated to treat 12,000 gallons (most competitor's treat only 500 to 5,000 gallons). Easy for the home owner to installThis
water filter allows you to customize your protection. It includes a 0.4
micron Absolute pre-filter to filter sediments, cysts, turbidity and
bacteria over 99.9%. The second stage is a KDF/GAC made from the
highest quality coconut shells filter cartridge to reduce or remove
chlorine, lead, pesticides and most major contaminants. You can choose
whether the third chamber filters fluoride, nitrate, or a carbon block
for longer contaminant protection.
Comes complete with stainless steel faucet spigot. Rated to treat 12,000 gallons (most competitor's treat only 500 to 5,000 gallons). Easy for the home owner to install.
What makes our filters better?
- Our filter cartridge is tested and rated for optimum performance at over 12, 000 gallons on city water.
- Filter cartridge needs only to be replaced on average every 3 years.
- Filter has a built-in 1 micron cyst-rated pre-filter to remove Cryptosporidium & Giardia.
- KDF media is the first stage after sediment to greatly extend the life of the carbon (GAC).
- GAC media is made from highly adsorbent shells-the most highly adsorbent known.
- Lifetime warranty on filter components, 3-year prorate on filter cartridge.
- 60-day money-back guarantee.
Designer faucets: For designer faucet colors, add $20.00,
choose from all brushed nickel, all black, all chrome, chrome with
brass accents, all white, all almond, and all polished brass.
| Specs |
|
Size: |
12" high, 15 inches wide, 5" deep
|
|
Flow rate:
|
1 gpm
| |
Filter maintenance: GAC/KDF
cartridge should replaced every 3 years as needed. The ceramic
cartridge may be cleaned up to 30 times. Third stage may be replaced or
regenerated as needed.
PuriTec UCT-F for fluoride filtration
FLUORIDE
REMOVAL FILTER Contains fine-mesh pre-conditioned Activated Alumina to
reduce fluorides below 0.5 ppm. Its capacity is up to 11,000 ppm with
effluent levels below 0.2 ppm from 10 ppm feed. Note: high pH and high
bicarbonate levels reduce the capacity - above 100 ppm bicarbonate,
reduce by 50%; above 200 ppm, reduce by 75%. Also effectively removes
arsenic.
PuriTec UCT-N for nitrate filtration
NITRATE
REMOVAL FILTER Contains a special nitrate-selective resin. Nitrate
reduction is 90% to 95% and breakthrough is not affected by sulphate
levels. The capacity is 5000 ppm of nitrates as CaCO3. To determine
capacity, first calculate the ppm of nitrates as CaCO3, then divide
that number into 5000 to get the gallons. This cartridge can be
regenerated using sodium chloride brine.
|
|
|
|
|
|
|
|
|
